VAS 5054A & UPA program VIN of VW10 airbag 5N0 pw NEA

Something about VW10 airbag 5N0 pw NEA VIN number setup (with VAS 5054A with ODIS 2.2.7 & UPA USB programmer), like wiring connection, access authorization, reading PIN and programming VIN number...

Disclaimer: TRY ON YOUR OWN RISK

Part 1 - devices and wiring connection

VW10 airbag & VAS5054A:

VAS 5054A and VW10 airbag wiring connection

Label 1:

Label 2:

VW10 airbag connector:

VW10 5N0 pin out connector

Wires pin connector:

UPA adapter vs eeprom programmer:

10 pin from UPA adapter goes to eeprom connector programmer right pin

Upa adapter:

Use the 10 pin connector (marked with yellow) to read the memory

Use upa programmer adapter on the position (marked with red) to read/write 99640-dw 8ss0p

10 pin connector:

Eeprom programmer pin out:

Part 2 - setup on VAS 5054A software ODIS

Access authorization:

Doing this event in ODIS 2.27 interface for authorization editing vin on the control module

Access authorization login”

Select automatic access authorization

Adapt airbag software:

Select adapt airbag software

Coding after authorization:

New codes here

Done!:

The connect vehicle identification number cannot be read from the engine control module.

Please enter vin number...

Fault free:

After you programming VIN number, you will see no more error codes here

On table:

There is only one control because of only the airbag control module on the table test

Vin 2:

Done

Go to read fault codes and see no more 0003 control module defective

Vin 3:

Click Done/Continue to go on

Vin 4:

Control module data is collecting..

Vin appear:

The connect vehicle identification number cannot be read from the engine control module.

Please enter vin number...

Vin input:

Input the vin number here

Attachment:

VIN number.txt

vw tiguan airbag 5no vw10 TRW TS6 file before & after programmed.rar