VAG diagnostic tool compare list: VAS 5054A VS VAG PRO 5.5.1

If you are looking for a VAG diagnostic tool and still have no idea before so many products, here is a compare list between VAS 5054A and VAG PRO 5.5.1 from eobdtool.co.uk engineers. It will advise you which one is better to choose.

VAS 5054A VS VAG PRO 5.5.1, get which one?

First, these two are both PC-based scanners for VAG Group vehicles, both can run on Windows7 or Windows XP.

Next, VAS 5054A OKI Chip and VAG PRO VCP 5.5.1 separate feature you should know:

1. VAS 5054A OKI Chip 3.0.3 €88/$96

It is OEM;

With OKI chip;

Support UDS protocol;

Support Bluetooth connection;

Support diagnose VW, Audi, Seat, Skoda from 1996-2013 and Bentley and Lamborghini around year 2011.

2. VAG PRO VCP 5.5.1 €45/$49

It is clone but tested work as the original;

Support CAN BUS+UDS+K-line;

Support diagnose VW, Audi, Seat, Skoda from 1990-2015;

Support VAG coding or programming (NO need engineer codes!);

Then, we discuss about the difference between VAS 5054A VS VAG PRO VCP 5.5.1

1. vas 5054a francais is OEM, so it fully supports every VAG model, but it’s slow and you need online connection for being able to do a lot of things. Coding must be online. (Need get software from VW dealer for online coding function) And ODIS 3.0.3 is best for flashing. But kind of slow when diagnose.
2. VAG PRO VCP 5.5.1 reads DTC fast, every feature is done offline, and work very well with Volkswagen Group MQB platform. It can do offline coding and programming as the original without need of engineer codes. VAG PRO is best for parameter and quick EEPROM read; It runs fast than VAS 5054A and more stable when directly connect to VAG ECU.
3. VAS 5054A support update online, but VAG PRO 5.5.1 does not support.

So answer on the bottom to “Which VAG diagnostic tool to choose?” is VAG PRO 5.5.1 is better and cheaper than VAS 5054A, but 5054A is also not bad. Both are advised by engineers and worth to choose!

VAS 5054A & UPA program VIN of VW10 airbag 5N0 pw NEA

Something about VW10 airbag 5N0 pw NEA VIN number setup (with VAS 5054A with ODIS 2.2.7 & UPA USB programmer), like wiring connection, access authorization, reading PIN and programming VIN number...

Disclaimer: TRY ON YOUR OWN RISK

Part 1 - devices and wiring connection

VW10 airbag & VAS5054A:

VAS 5054A and VW10 airbag wiring connection

Label 1:

Label 2:

VW10 airbag connector:

VW10 5N0 pin out connector

Wires pin connector:

UPA adapter vs eeprom programmer:

10 pin from UPA adapter goes to eeprom connector programmer right pin

Upa adapter:

Use the 10 pin connector (marked with yellow) to read the memory

Use upa programmer adapter on the position (marked with red) to read/write 99640-dw 8ss0p

10 pin connector:

Eeprom programmer pin out:

Part 2 - setup on VAS 5054A software ODIS

Access authorization:

Doing this event in ODIS 2.27 interface for authorization editing vin on the control module

Access authorization login”

Select automatic access authorization

Adapt airbag software:

Select adapt airbag software

Coding after authorization:

New codes here

Done!:

The connect vehicle identification number cannot be read from the engine control module.

Please enter vin number...

Fault free:

After you programming VIN number, you will see no more error codes here

On table:

There is only one control because of only the airbag control module on the table test

Vin 2:

Done

Go to read fault codes and see no more 0003 control module defective

Vin 3:

Click Done/Continue to go on

Vin 4:

Control module data is collecting..

Vin appear:

The connect vehicle identification number cannot be read from the engine control module.

Please enter vin number...

Vin input:

Input the vin number here

Attachment:

VIN number.txt

vw tiguan airbag 5no vw10 TRW TS6 file before & after programmed.rar

5054A ODIS 2.0 license error - Could not parse certificate (fixed)

Received complaint from a customer with VAS 5054A plus..said his ODIS 2.2 came with license error.. Then obdtool engineer helped to solve it.

ODIS 2.0 error message:

OffboardDiagLauncher 0.239.846

Error reading the license file: Could not parse certificate: java.io.IOException: Empty input

This license is invalid

Solution:

- Setup Date on your laptop: 01/01/2015

- Re-install laptop operating system: use Windows XP O.S.:

http://www.chinaautodiag.com/html/ghost-windows-xp-professional-sp3-free-download-and-installation-6476.html

Relate products:

Best Quality VAS 5054A ODIS V3.0.3 Bluetooth Diagnostic Tool With OKI Chip UDS Protocol for VW Audi Skoda Seat:

This is from OBD2 Diagnostic Tool website technical support: 5054A ODIS 2.0 license error - Could not parse certificate (fixed)

Free Download ODIS 3.0.3 PostSetup 9.3.10 torrent (new)

 ODIS service 3.0.3 PostSetup 9.3.10 is shared with all vas 5054a users. Free download ODIS 3.0.3 here to update 5054a diagnostic system.

Free Download:

ODIS 3.0.3 PostSetup 9.3.10 torrent (being tested, RISKY to try)

ODIS 3.0.1 PostSetup 9.0.10 (populous, SAFE)

OS requirement:

WIN 7 operating system

(if you cannot install ODIS 3.0.1 on your Win 7 OS, try this WINDOWS 7 32 BIT.zip )

How to install Vas 5054A ODIS 3.0.3:

Refer to ODIS 3.0.1 installation instruction

Compatible device:

VAS 5054A interface

  

NOTE:

almost 5054a at obdtoolis safe to work with ODIS 3.0.1, but risky to used with ODIS 3.0.3

Difference among VAS 5054A:

Item Number	SP33	SP33-B	SP33-BO	SP33-C	SP33-D
Feature	normal one	cheaper one	perfect version	best quality one	cheapest one
oki chip	without oki chip	without oki chip	with oki chip	with oki chip	without oki chip
software version	ODIS V3.0.1	ODIS V3.0.1	ODIS V3.0.1	ODIS V3.0.1	V19

5054a basic information:

The vehicle protocols are handled directly in the VAS 5054A ODIS Bluetooth.

This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A interface software is identified with the version installed on the application PC. The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.

The diagnostic application and the associated Diagnostic Base System are installed on the application PC.

The diagnostic base system can access the VAS 5054A OKI ODIS via Bluetooth or USB.

Access via Bluetooth: After a connection to the VAG VAS 5054A Diagnostic Tool  has been set up,the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile).The Diagnostic Base System uses this COM port to communicate with the VAS 5054A ODIS VW AUDI diagnostic tool.You need to specify this port when you install the diagnostic application.

Access via USB: You can also connect the VAS 5054A odis to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.

3C-Passat 2006 Diagnose by Newest VAS 5054A V2.26

This is the case we successfully tested on 3C-Passat 2006 with the latest ODIS 2.26 for VAS 5054A.

Computer requirement:

Windows XP/ Wind 7 System

Steps:

Open Offborad Diagnostic Information System on Desktop

Read Warnings, and then scroll down it and click OK.

Click the last line Starting diagnosis.

Check if the ignition is switched on in the vehicle. Click Continue.

Finish the vehicle basic feature. Click Apply.

Select the first line and click No RO.

Click Networking diagram, then click the content.

Click continue to enter diagnosis.

Click MOT_O1.

Click Control Module List

Click DTC memory to read, and click the first line”Engine Control Module 1”, then Diagnosis.

Click Yes to cancel diagnostic entrance.

Click the cross button under the operating modes.

Click Yes to end.

Done.

Ps. The latest software ODIS 2.26 only compatible with the following 5054A:

（Best Quality VAS 5054A）

Newest VAG Scanner VAS 5054A ODIS V2.26 Released!!

Hello, all!! Here comes the newest version of VAS 5054A ODIS 2.26. This is a detailed introduction of 5054A 2.26.

What’s new in VAS 5054A V2.26?

- Estimated remaining times are shown for ECU flash operations.
- Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view, used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests
- The measured value display has been improved.
- Documents in GFF are displayed in separate windows.
- One message box will be shown at the beginning of the test drive mode.
- GFF hotfixes can be integrated during diagnostic sessions.
- Danger messages have been revised.
- Stopping of diagnostic sessions may be interrupted.
- Automatic deletion of autosave diagnostic protocols after successful transmission.
- Selection of PassThru diagnostic hardware has been improved.
- ODIS Service Software update has been stabilized.

Which 5054A device available for ODIS 2.26?

sp33-c(Best Quality VAS 5054A ODIS V2.0 / V2.02)

VAS 5054A V2.26 ODIS for VW Audi Seat Skodasoftware display:

 5054A PCB board:

2015 New VAS 5054a Plus ODIS 2.0 with original HQ PCB

2015 VAG diagnostic scanner VAS 5054 Plus with HQ chip and original 5054a case are available in obdtool.co.uk. The new VAS5054a plus share the same software with vas 5054a Bluetooth, but differs in outlook and PCB board.

Difference vas 5054a and 5054 plus:

1) Vas5054a case/outlook

New VAS5054a Plus

2) PCB board differences:

Vas 5054a PCB board

SP33-C Blue PCB

SP33-B/SP33-BO Green PCB

New VAS 5054 Plus PCB board

Green HQ PCB

A-board: SP33-E3/SP33-E4 Bluetooth (OEM 2.0) chip, less stable

B-board: SP33-E/SP33-E1 High Quality Bluetooth (AMB 2300) chip, more stable

Software version:

ODIS 2.0 Multi-Language:

English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French/Italian/Croatian/Danish/German/Swedish/Finnish/Slovenian/Czech/Russian/Greek/Chinese

ODIS 2.02 English/Chinese

Supported Multi-brand Car Models: For VW, AUDI, SKODA, SEAT, Bentley and Lamborghini

Connection: USB or Bluetooth connection

Computer requirement:

Windows System Language: American English

Windows XP (XP2/XP3)

System C:// have to be NTFS format

C:// need to have at least 40GB space for installing ODIS V2.0

 We can also offer free software V19 VAS, if you need, choose software V19 when ordering. V19 VAS Software can support the J1850 PWM protocol.

WIFI Version VXDIAG VCX NANO 5054 ODIS V3.03 Support UDS protocol et le français